1 6

Gel Top and Base Coat Set

$12.99 $12.99
  • HEMA-free
    HEMA-free
  • 21 Days of Wear
    21 Days of Wear
  • Anti-chip
    Anti-chip

The foundation of a long-lasting gel manicure. Two 15ml HEMA-free and TPO-free bottles : a base coat and a high-gloss top coat, formulated to cure rock solid under any SUNUV UV LED nail lamp.

  • Glass-hard finish
  • 21-day hold
  • No-wipe formula
  • Designed for SUNUV gel polish
  • Free US shipping $50+
  • 60-day returns

long-lasting gel polish

High quality formula

A 2-pack of gel base coat and no-wipe gel top coat for long-lasting at-home gel manicures. The base coat grips the gel polish to the nail plate, the no-wipe top coat locks in a glassy seal that does not need an alcohol wipe. 15 ml salon-size bottles, HEMA-free and TPO-free gel formula. Cures in 60 to 90 seconds under any SUNUV UV LED nail lamp. Pair with any SUNUV gel polish.

HEMA & TPO-Free

HEMA & TPO-Free

No harsh allergens, no sensitization risks, no ingredient anxiety.

Easy to Use Brush

Easy to Use Brush

Wide, fan-shaped brush for smooth, even application in fewer strokes.

21+ Day Wear

21+ Day Wear

Long-lasting gel polish that won’t chip or peel for at least 3 weeks.

Buildable Translucency

Buildable Translucency

Sheer color with 1 coat or full saturation with 2-3 coats.

Formulated without HEMA, HPMA, or TPO — three ingredients commonly associated with sensitization concerns in traditional gel systems.

Also formulated without Formaldehyde, Toluene, DBP, Formaldehyde Resin, Camphor, Ethyl Tosylamide, Xylene, TPHP, Acetone, BPA, Parabens, Phthalates, and Sulfates.

HEMA & TPO-Free Base Coat (15 mL):
 Hydroxyethylcellulose, Diisopropyl adipate, Ethylhexyl Hydroxystearate, Acrylates/VP Copolymer, Benzyl methacrylate, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Methicone, Polydiethylsiloxane

HEMA & TPO-Free Top Coat (15 mL):
 4-ethyl-2-methylideneoctanoic acid; methyl 2-methylprop-2-enoate, Polyethylene Terephthalate, VP/DMAPA Acrylates Copolymer, Dipentaerythrityl Pentaacrylate, Pentaerythrityl Tetracaprylate/Tetracaprate, Acrylates/VA Copolymer, Polyacrylic acid, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Methicone, Glyceryl Dimethacrylate, Dimethiconol stearate, Ferric Ferrocyanide.


they keys to a

Great manicure

Application

  1. Prep. Clean nails thoroughly, lightly buff the surface, and remove all oil and residue. Skipping this step is the most common reason gel lifts early.
  2. Base coat. Apply a thin, even layer. Cure with your SUNUV lamp.
  3. Color. Apply 1-3 thin coats depending on your desired translucency and saturation. Cure between every coat. Avoid thick layers; thin coats cure more completely and wear longer.
  4. Top coat. Seal the free edge. Cure.
  5. Cuticle oil. Apply after every manicure. Every time.

Cure times range from 60 to 90 seconds depending on your SUNUV lamp model and layer thickness. Your gel is fully cured when the surface is no longer tacky after wiping.

Removal

  1. Break the seal. Lightly file the top layer of the gel to remove the shine. This lets the acetone penetrate.
  2. Soak. Saturate a cotton pad with acetone and press it onto the nail. Wrap each finger in foil to hold it in place.
  3. Wait. Leave wrapped for 10-15 minutes. Don't rush this step.
  4. Lift. Gently push the softened gel off with a cuticle stick. It should slide off with light pressure.
  5. Re-soak if needed. If the gel resists, wrap and soak again rather than scraping or forcing it.
  6. Moisturize. Apply cuticle oil and hand cream immediately after removal. Acetone dries skin and nails.

Never peel or pick gel polish off. This is the leading cause of nail damage in gel manicures, and it takes layers of the natural nail with it.

Pair your gel polish with the

Perfect Nail Lamp

Take the Quiz Shop Nail Lamps
YOUR FAVORITES

As Seen on #NAILTOK.

Questions, sorted

Everything before your first cure.FAQs

The questions our customer team actually gets — answered plainly, no manual-speak.

Contact our team

We typically recommend 30 seconds to cure the base coat then 60-90 seconds for curing color gel and the topcoat. Builder gels and harder formulations may require longer cure times. Use your lamp's timer presets.

Lightly buff the top coat, soak in acetone for 10–15 minutes, then gently push the softened gel away. Never force or peel it.

Our LEDs cure in short, timed bursts well within recommended exposure limits. Apply SPF on the backs of your hands if you cure frequently.

Free shipping on orders over the threshold shown at checkout, 30-day returns on unused lamps, and a 12-month warranty on every device.

Stay in the glow

10% off your first order.

By signing up you agree to receive marketing from SUNUV. Unsubscribe anytime.

By signing up you agree to receive marketing emails. Unsubscribe anytime.