USAGE INSTRUCTIONS

1.Connect the power adapter to the main unit first, then plug the adapter into a power outlet.

2. Press the main unit power switch button. After startup, press the Wi-Fi button to access the network configuration interface. Follow the on-screen prompts to scan the QR code with your mobile phone, then enter information such as the Wi-Fi account and password. Place the QR code generated by your mobile phone directly below the device's camera, follow the on-screen prompts to operate, and press the "Wi-Fi Connection Button" to proceed. Once the device's camera recognizes the QR code, a beep will indicate successful scanning, and the system will connect to the network successfully.If the system fails to connect to the network, check the Wi-Fi account and password, then try to connect again.If you do not need to connect to the network temporarily, press the "Wi-Fi Connection Button" to exit and enter the standby state.

Note: Only 2.4G Wi-Fi is supported. Wi-Fi networks that require secondary authentication cannot be connected