Inside the All-in-One Nail Kit: Your First Gel Manicure, Step by Step

Inside the All-in-One Nail Kit: Your First Gel Manicure, Step by Step

in Sep 25, 2026

Opening a gel nail kit for the first time is easier when you know what each piece does before you start. This walkthrough covers everything in the SUN1 Pink All-in-One Manicure Kit and what it's for, then takes you through your first gel manicure with the kit's UV light, from setup to removal, with fixes for the problems first sets tend to run into.

Want the method on its own, without the kit? Our guide to how to do gel nails at home covers it step by step.

What's in the box

The SUN1 Pink All-in-One Manicure Kit is an 18-piece gel kit: a SUN1 Pink lamp, 12 gel colors, a base coat, a top coat and three tools, plus a power adapter, a user manual and a step-by-step manicure guide.

Every item and what it's for

  • SUN1 Pink lamp. Cures each coat of gel. It switches on when you slide your hand in and turns itself off when the timer ends. More on it below.
  • Power adapter and USB-C cable. Power the lamp from a wall outlet.
  • 12 gel colors (5 ml each). The color coats. Build each one in thin coats: one for a sheer wash of color, two or three for full color.
  • Base coat (5 ml). The first layer on the bare nail, and what the color holds on to.
  • Top coat (5 ml). The final layer. It seals the color and gives the finish its shine, and it's a no-wipe formula, so there's no sticky layer to remove at the end.
  • Nail file. Shapes each nail's length and edge.
  • Nail buffer. Takes the shine off the nail surface so the base coat can grip.
  • Dotting tool. Adds dots and small details for simple nail art.
  • User manual and step-by-step guide. Worth reading once before your first manicure, especially for cure times.

What you'll need that isn't in the box

  • Rubbing alcohol and lint-free wipes, to clean the oil off your nails before the base coat.
  • A cuticle pusher or orange-wood stick, to push cuticles back.
  • Cuticle oil, to finish the manicure.
  • For removal: acetone, cotton pads, aluminum foil and a cuticle stick.

The lamp: what it is and why this one

The lamp in the kit is the SUN1 in pink, SUNUV's entry-level UV/LED lamp, sized for home use and made for anyone new to gel. It has 30 LEDs, an infrared sensor that switches it on when you slide your hand in, and timer presets that switch it off on their own.

Why gel needs a lamp at all. Gel doesn't air-dry. It hardens, or cures, when ingredients in the formula called photoinitiators react to light at particular wavelengths. The SUN1's LEDs cover two ranges: 365–375 nm and 390–405 nm.

What that means for your first manicure:

  • Starting is automatic. Slide your hand under the lamp and the sensor turns the light on.
  • So is stopping. Choose a timer preset (5, 30 or 60 seconds) and the lamp switches itself off when the time is up.
  • It's sized for home. The lamp measures 150mm x 190mm x 85mm, small enough to keep on a desk or shelf between manicures.

SUNUV pioneered the UV LED nail lamp, and the SUN1 is the one it makes for people just starting out. If you also have gel from other brands, see "Using the kit with gel you already own" below.

 

Setting up, once

Before your first manicure, plug in the lamp, read the guide once and lay everything out in the order you'll use it. It takes one sitting, and every manicure after is easier for it.

A table, an outlet and good light

Set up at a clean, flat table near an outlet, with good light overhead. Plug the lamp in with the included power adapter, then slide one hand under it with bare nails. You'll see how the sensor starts the light and how your fingers sit under it, before there's any gel involved.

Read the user manual and the step-by-step guide once, paying attention to the cure times. Then lay the pieces out in the order you'll use them: file, buffer, base coat, colors, top coat, dotting tool.

Where to keep it between sets

Store the bottles upright with the caps on tight, in a drawer or on a shelf out of direct sunlight. Gel is made to harden under UV light, and daylight carries some UV, so a bottle left on a sunny windowsill can thicken. Wipe the neck of each bottle before you close it so the cap doesn't stick. Keep the lamp and tools in the same spot, and the next manicure starts with everything in one place.

Step 1: Prep

Prep is what helps gel stay put: shape each nail, push the cuticles back, buff off the shine, then clean the nail surface with alcohol.

Shape and push back

File each nail to the length and shape you want with the kit's file, working in one direction rather than sawing back and forth. Then gently push the cuticles back with a cuticle pusher or orange-wood stick. Don't cut them; dermatologists advise against it.

Buff off the shine

A light pass with the kit's buffer takes the natural shine off the nail, which gives the base coat something to grip. Keep it light: you're aiming for a matte surface, not a thinner nail.

Dehydrate and wipe

Wipe each nail with a lint-free wipe and a little rubbing alcohol to remove dust and natural oils. It's an easy step to skip, and skipping it is a common reason a first set lifts early. From here on, try not to touch your nails.

Step 2: Base coat and first cure

Brush on one thin layer of base coat, cap the free edge, then cure it under the lamp for the time in the kit's guide.

Thin, and capping the edge

Apply the base coat in one thin, even layer. Then run the brush lightly along the very tip of the nail to cap the free edge. Sealing the tip helps stop the gel from lifting or chipping there.

Hand position under the lamp

Lay your fingers flat under the lamp, side by side, with every nail facing up into the light. Cure the four fingers of one hand, then the other, then both thumbs together. A thumb rarely sits flat next to the other fingers, and a nail tilted toward the edge of the lamp can cure unevenly.

Which timer preset to use

The SUN1's timer presets are 5, 30 and 60 seconds, and the lamp turns itself off when the time is up. Use the cure time in the kit's step-by-step guide, and if a coat needs longer than one preset, run a second cycle. After curing, the base coat will feel slightly tacky. Leave it: the color coat bonds to that layer.

Step 3: Color

Paint two thin coats of color, curing after each one, and keep the brush just back from the cuticle.

Two thin coats beat one thick one

Two thin coats cure more completely and look more even than one thick coat, which can harden on the surface while staying soft underneath. For deeper color, add a third thin coat.

Staying off the cuticle line

Start each stroke just back from the cuticle rather than right at it. A slightly smaller coat is easy to fix; gel that floods onto the skin and cures there isn't. If any gel touches the skin, clean it away with an orange-wood stick before you cure.

Curing between coats

Cure after the first coat of color and again after the second. Skipping a cure to save a minute is how you end up with a soft layer buried under one that looks finished.

Adding dots with the dotting tool

Once the last color coat is cured, dip the dotting tool in a second shade and touch it lightly to the nail for dots or a simple pattern. Cure again, then move on to the top coat.

Step 4: Top coat and finish

Seal the color with a thin top coat, cap the edge, cure it, and finish with cuticle oil.

Final cure

Apply the top coat thin, cap the free edge the same way as before, and cure for the full time in the guide.

No wipe needed

The kit's top coat is a no-wipe formula, so once it's cured your nails should feel smooth and glossy, with no sticky layer to wipe off. The tackiness after the base and color coats was normal; only the top coat should cure dry. If it still feels tacky after its full cure, see the troubleshooting section below.

Cuticle oil

Finish with a drop of cuticle oil, like NOURISH Hydrating Cuticle Oil, worked into the skin around each nail. It keeps that skin from drying out, especially after the alcohol in the prep step.

Step 5: Removal, done properly

Gel comes off with acetone, never by peeling: file off the shine, soak each nail under foil for 10 to 15 minutes, then gently push the softened gel away.

File, soak, push

You'll need acetone, cotton pads, aluminum foil and a cuticle stick, none of which come in the kit.

  1. Lightly file the shiny top coat to break the seal.
  2. Soak a piece of cotton in acetone, place it on the nail and wrap the fingertip in foil.
  3. Wait 10 to 15 minutes, then gently push the softened gel off with the cuticle stick.
  4. If it doesn't lift easily, wrap it again for a few more minutes rather than scraping.
  5. Wash your hands and moisturize.

Never peel or pick gel off: it can take layers of the nail with it.

Rest days between sets

A short break between sets, even a day or two with bare nails, gives the nail plate a chance to recover before the next manicure. Our Gel Break routine covers how to care for nails in between.

Using the kit with gel you already own

Check the label first: another brand's gel should say it cures under an LED or UV/LED lamp, and its instructions give the cure time to follow.

What to look for on the label

Gel formulas use different photoinitiators, the ingredients that react to the lamp's light, so cure times vary from brand to brand and even from bottle to bottle. Before you use another brand's gel with the SUN1, check that its label calls for an LED or UV/LED lamp, and note the cure time it gives.

Adjusting cure times for other brands

Follow the time on the bottle rather than habit. If it's longer than one of the SUN1's presets, run a second cycle. Base and color coats can feel tacky on the surface after curing, but the gel underneath should be firm. If a coat is still soft after its full time, cure it for another cycle, and check the bottle's lamp requirements before your next set.

First-set troubleshooting

Most first-set problems come down to prep, thick coats or hand position, and each one is easy to fix on the next manicure.

Tacky after curing

After the base and color coats, a slightly tacky surface is normal: leave it, since the next coat bonds to it. After the final top coat, the no-wipe formula should cure smooth and dry. If it's still tacky, the coat was probably too thick or under-cured. Cure it for another cycle, and go thinner next time.

Lifting after a few days

Usually traced back to prep: oil left on the nail, a free edge that wasn't capped, or gel that touched the cuticle or skin. On the next set, dehydrate carefully, cap every coat and leave a small gap at the cuticle.

Wrinkled top coat

Usually a coat that went on too thick, or sat too long before curing. Apply it thinner and move from brush to lamp a little faster next time.

Uneven cure across the hand

Usually hand position: a finger tilted toward the edge of the lamp, or a hand pulled too far back. Lay your fingers flat and cure the thumbs on their own.

The lamp doesn't start

Check that the power adapter and cable are firmly connected, then slide your hand fully under the lamp so the sensor can pick it up.

Ready for your first manicure?

The SUN1 Pink All-in-One Manicure Kit has everything in this walkthrough except the prep and removal basics: the lamp, 12 colors, a base and top coat, and the tools to start.

Still deciding? Our guide to choosing an at-home gel nail kit covers what to look for.

Shop the SUN1 Pink All-in-One Kit →

Stay in the glow

10% off your first order.

  • Early access to drops
  • Editorial how-tos
  • Members-only bundles

By signing up you agree to receive marketing from SUNUV. Unsubscribe anytime.

By signing up you agree to receive marketing emails. Unsubscribe anytime.